Why am I Constantly Breaking Vacuum Cleaner Belts?

Imagine this you are vacuuming your dining room floor, preparing for company to come over for a special dinner when suddenly. You hear a noise that sounds like something that just broke. It was the vacuum belt, but you can prevent this situation from happening by following a few simple tips. Regardless of the type of vacuum you have, upright or canister, it is almost certain to have a belt within it. Simply made of a band of rubber, belts are made of many unique sizes and styles to accommodate the numerous vacuum cleaners found in houses today.

One of the first things to look for when trying to fix a problem with a belt is to make sure that the belt is meant to work with your vacuum cleaner. Although belts are similar in construction, each vacuum cleaner belt is created in a way to work smoothly with a certain vacuum cleaner. Incorrect usage of a wrongly fitting belt will lead either to a broken belt, or even a broken vacuum.

It is crucially important that you are correctly using the proper belt for your vacuum cleaner. To identify which belt will fit your machine first check your vacuum cleaner to see if there is a number or style written on the vacuum. If the style or number cannot be found on the machine then check the belt that came with the machine. If you are still having trouble locating the belt number or style, check your instruction manual.

An additional problem that arises from vacuum belts is incorrect installation of the belt. To correctly install the belt it is important to make sure that the belt goes around the motor spindle and then around the brush roll. When installing the belt it will be evident there is a lot of tension in the belt and putting the brush roll in the correct slots is difficult because there is a tremendous amount of tension. The tension felt is entirely normal and essential to perform its job of rotating at high velocity speeds.

A commonly asked question is why do vacuum belts break and what can I do to prevent this breakage? If my vacuum cleaner belt is breaking on a regular basis should I be concerned? Just because a vacuum cleaner belt is correctly installed does not mean that is immune from breaking. A number of things can cause belt breakage an example being worn out from repeated machine usage. Another instance which occurs more frequently is snagging, which is cause by running over the rim of a rug or a blanket. When situations such as this occur the belt gets stuck and overheated resulting in instantaneous breakage. Repetition of belt breakage because of this reason is more likely to occur if your vacuum is not a gear-driven belt system with electronic overload. Therefore, when buying your next vacuum, it is important to ask for a gear-driven belt system with electronic overload as this type of vacuum will severely cut down on the amount of belt breakages you receive.

After correctly installing your belt a few things should be kept in mind to avoid belt breakage. When vacuuming it is very important to prevent snagging by not running over items such as the rugs, blankets, towels, sheets, or even the machines own cord. Remember that snagging puts you at a tremendous danger of breaking your machines belt. An additional tip to remember is to maintenance you vacuum cleaner by consistently having your belt changed every 6 months to prevent ineffective carpet cleaning. It is crucial to keep up on changing your belt as over time the belt naturally wears down and becomes looser due to repeated use. When a machine belt becomes looser, it cannot longer function properly as it loses the ability to rotate the brush roll at an appropriate amount of rotations per minute. An old belt will cause a vacuum cleaner to function at a level that is far from best, so be sure to consistently keep up on changing your belt.

There are all different kinds of belts that exist. Many are flat belts, but there are also round belts and cogged belts. Round belts are used with old style machines that use a fan system. Cogged belts can be found on machines with electronic overloads. When you snag on something, vacuum cleaners that use cogged belts are the best because they are much less likely to break a belt. This is because the machine is aware when something is caught or snagged and will shut down to prevent belt breakage. Then you either turn the machine on and off or press a reset button in order the make the brush roll turn again. This feature is found on many machines such as the Miele, Simplicty, Dyson and Sebo. This feature is great because it prevents belt breakage and frustration. When purchasing a machine this should be definitely be a consideration because it does not even require 6-month belt changes, saving you time and money.

Vacuum cleaners break belts often for many people and now you understand why and how such problems can be avoided. Following these simple steps or buying a new vacuum cleaner with the proper belt system can help prevent vacuum cleaner belt breakage.

Article Source: http://www.articlerampage.com}

To purchase a vacuum cleaner that Doesn't need belt changes and has the electronic overload protection stated within this article visit our selection of Miele vacuum cleaners.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated